AUTONET TV

Giving CV Joints the Boot! (CV Joint and Boot Replacement)

Ever wonder how your vehicle’s transmission is connected to your wheels? After all, when you hit a pothole or some other uneven part of a road’s surface, there has to be something that can maintain the connection between the transmission and the wheel yet keep everything moving at the same speed. 

That very cool device is called a CV joint, a kind of driveshaft running to each wheel.  The CV stands for constant velocity because it keeps the drive wheels moving at a constant speed (velocity).  They’re used mostly on front-wheel drive vehicles but also in rear-wheel and all-wheel drive vehicles.

The joints move up and down and adjust to bumpy surfaces.  Plus, they are covered in a rubber boot which protects them from road debris and also holds lubrication in.  There’s a CV joint and boot on the transmission side and one on the wheel side.  Unfortunately, the spot that usually fails first is that rubber protective cover (the boot).  After a lot of wear, tear, bumps, road hazards, heat, and you name it, the rubber rips and the lubrication leaks out.  At that point, it must be replaced. 

Here are signs to tell if your CV joint is bad.

• Your vehicle is pulling to one side as a wheel loses power or you feel a vibration while driving.
• You see grease on the inside or edge of your tires.  
• Your front tires won’t point in the same direction.
• You hear grinding or clicking when you turn.

Sometimes if a broken boot early is caught early, a technician can pack in new grease and replace just the boot.  But if the lubrication has leaked out and the joint is already wearing badly, the CV and boot both have to be replaced.  Give your vehicle the boot (as in a new boot) and CV joint, and you’ll be back on the road to your next destination.

Arizona Auto and Radiator Repair
1255 E FRY BLVD
Sierra Vista, AZ 85635
520-459-2216
http://www.azautorepair.net

Let's Clear Some Things Up (Headlight Restoration)

You know how exposing your skin to sunlight can cause sunburn and other unhealthy things.  Sunlight can also create major problems for your headlights.  After they've been exposed to ultraviolet light, acrylic headlights can yellow and fog due to oxidation.  And when that happens, less light can pass through the plastic, reducing the effectiveness—and safety—of your headlights. 

It's not just the UV light that causes headlights to turn cloudy.  Road grime and debris gets kicked up and can scratch the plastic, diffusing the light that should pass through them when they're clear.  Plus, when your vehicle was new from the factory, the headlights had watertight seals all around to prevent moisture from getting into them and fogging them up with water vapor.  Just like clouds can hide the sun, tiny water molecules can diffuse the light from your headlight bulbs. 

Sure, you could buy replacement parts and start fresh.  But the good news is many vehicle repair facilities can restore your original headlights to perform like they did when you first bought your vehicle.  Here's how it works:

• A technician will protect your vehicle's paint by either taking the headlights out or by taping off the paint near the headlights and leaving them in place.
• Residue is removed from the headlight surfaces by wet sanding to remove the oxidized plastic.
• Using special compounds, the technician will buff and polish the surface of the lens so it looks as smooth as glass. 
• The newly-polished plastic is then sealed with wax or a special sealant designed to keep them operating like new. 
• If the seals that keep the moisture out of the inside of your headlights have dried out or cracked, they will be restored or replaced to keep condensation from forming again.

Visibility at night is vital for safe driving, and if your headlights aren't performing up to their potential, the less you'll be able to see ahead of you.

There are many advantages of having your headlights restored rather than buying new or aftermarket replacements.  It's friendlier to the planet since plastics are made of oil, so it's reducing the amount of plastic that is manufactured.  And it's usually cheaper to have your headlights restored rather than replaced.

Consider headlight restoration a way to literally recycle those parts of your vehicle.  That seems to be perfectly clear!

Arizona Auto and Radiator Repair
1255 E FRY BLVD
Sierra Vista, AZ 85635
520-459-2216
http://www.azautorepair.net

Them's the Brakes (Brake Rotor Resurfacing)

Your vehicle's brakes wear out.  It's inevitable. You'll notice it when you step on the brake pedal and feel it harder to stop, or there's vibration when you are braking. 

Most modern vehicles have disc brakes that each use a brake pad that press on a disc (disc brakes!) called a rotor.  The friction between them enables you to stop, and each time you do a little bit of the pad and the rotor wears down.

The original brakes on vehicles used a rotor that was thick enough to last through at least two replacements of the pads.  But vehicle manufacturers who want to save costs and weight now make them thinner, and sometimes the rotors have to be replaced after the first pad replacement.  But not always.

Vehicle manufacturers specify a minimum thickness to provide safe braking.  Sometimes rather than having to have your rotors replaced, they can be put on a lathe and resurfaced.  In other words, the surfaces of the disc can be slightly shaved off so the surface is flat and doesn't wobble. 

Whenever you bring your vehicle in to have the brakes checked, the technician will measure the thickness of the rotors to see if they can be resurfaced without leaving them too thin for safe braking. If they can, with the right tools and skill, the rotors can be resurfaced.  If not, the rotors should be replaced. 

Discuss the options with your service advisor.  Our service center can recommend replacements that are designed to help stop your vehicle as well as or better than the vehicle's original rotors.

Either way, keep in mind that keeping your brakes in top condition can supply the margin of safety that may one day save your life or the lives of those around you.

Arizona Auto and Radiator Repair
1255 E FRY BLVD
Sierra Vista, AZ 85635
520-459-2216
http://www.azautorepair.net

A Hot Mess (AC System-Compresser)

Air conditioning used to be a real luxury in a vehicle, but now it's standard in most.  Your vehicle's air conditioning system is built to last a pretty long time, but like anything mechanical, sometimes it fails. 

It helps to know a little about how the A/C works. There's a compressor that pressurizes the refrigerant (you probably recognize the term Freon).  That makes it hotter, so it then goes through a condenser that cools it off.  Then another component takes out impurities and humidity before the Freon goes to a device that makes it lose pressure before it goes to the evaporator.  That's where it gets colder and takes the humidity out of the air. Then your vehicle's ventilation system blows air over the evaporator, cooling the cabin air that gives you such relief on a hot day.

Of all these parts, one that does a lot of work is the compressor.  It has to compress that refrigerant and circulate it through the system.  It turns on and off several times when it's working. The good news is that if it's going to fail, it sometimes lets you know. 

One of the signs that your air conditioning compressor is going bad is a noise under the hood when the engine is on, sometimes a squealing or grinding sound. It usually is pretty noticeable. Compressors have a bearing that can seize up after time, causing the belt that drives it to squeal when it's trying to turn something that won't turn.  It will sometimes cause that belt to break. 

Your service advisor can tell you if your compressor is repairable or must be replaced.  In the case of a broken belt (often a serpentine belt that drives several components) the belt will have to be replaced as well.

The compressor also has a clutch that turns the compressor on and off so it doesn't have to run all the time. Sometimes that clutch can fail, too, and your service advisor will often recommend you replace the compressor and the clutch at the same time. Our technicians can help make sure your air conditioning system keeps its cool, and you along with it. 

Arizona Auto and Radiator Repair
1255 E FRY BLVD
Sierra Vista, AZ 85635
520-459-2216
http://www.azautorepair.net